How to build a bar? Building a bar can be a great way to add extra functionality and storage to your home. Plus, it can be a really fun project that you can do with friends or family. If you're thinking of building a bar, here are some tips to help get you started.
What is a Bar?
A bar is an establishment that typically serves alcoholic beverages, such as beer, wine, and cocktails. Bars are often furnished with stools or chairs for patrons to sit in, and many also have televisions or jukeboxes. Some bars may also offer light snacks or bar food. Many bars stay open late into the night, and some are even open 24 hours. Bars are found in many different settings, including restaurants, hotels, clubs, and pubs.
How to Build a Bar?
Building a bar can be a fun and rewarding project. Whether you're looking to build a bar for your home or for your business, there are a few things you'll need to keep in mind. In this article, we'll walk you through the process of building a bar, from start to finish.
- First, you'll need to decide on the location for your bar. This is important, as the location will determine the size and shape of your bar. Once you've decided on the location, you'll need to measure the space and determine what kind of bar you'd like to build. There are many different types of bars, so it's important to choose one that will fit your needs.
- Next, you'll need to gather the materials for your bar. This includes things like lumber, plywood, bar stools, bar tables, and more. Once you have all of the materials, you'll need to start assembling your bar. This can be done by following a set of plans or by Winging it.
- Finally, once your bar is assembled, you'll need to finish it off with a finish of your choice. This could be paint, stain, or even varnish. Once the finish is applied, your bar will be ready to use. Once the bar is built, then you'll need to stock it with all the necessary supplies. This includes things like bar stools, bar tables, bar glasses, and bar accessories. You'll also need to make sure that you have a good selection of Alcohol. Be sure to choose a variety of different types of alcohol so that your guests will have something to suit their taste.
Now that your bar is built and stocked, then you're ready to start serving your guests. Be sure to have a good bar service plan in place so that your guests are taken care of from the moment they arrive until the moment they leave. This includes things like having a bartender on hand to serve drinks, having someone to handle food service, and having someone to take care of the clean up afterwards. By having a well-organized bar service plan, you can ensure that your guests have a great time and will want to come back again.
Does A Wet Bar Add Value To Your Home?
A wet bar is a bar that includes a sink. This is very useful for the people living in the house, as it eliminates the need to go back and forth from the bar to the sink. In addition, a wet bar can increase the resale value of your home by up to 70%. Therefore, remodeling your home to add a wet bar is a great investment. It turns a living room into an entertaining space where having the drinks close to the party allows the homeowner to play host, pour the liquor, and join in the fun.
How to Build a Home Bar?
A home bar can be a great addition to any house. Not only does it add extra storage and surfaces for drinks and food, but it can also provide a space for friends and family to gather. If you’re thinking of adding a home bar to your house, here are some tips on how to do it right.
Home Bar Parts Overview:
Day-to-day Timeline:
- Prep Day: Build, trim, and assemble the bar's side panels (Steps 1–7).
- Saturday: Install the shelves and corner stiles, and create the bar top (Steps 8-12).
- Sunday: Install the bar-rail molding and optional foot rail (Steps 13-15).
Refer to :Cut List to Build a Bar: and :Shopping List" at the bottom of this section for materials and products.
Steps on How to Build a DIY Bar:
1. Lay Out the Three Sides:
- Using a circular saw, cut the ½-inch plywood to size for the bar's front and side panels.
- With a miter saw, cut the 1x4 framing boards to length; use them to line the panels' perimeter, and arrange three more, equally spaced between the side boards, as shown. And if you plan to install brackets for a foot rail, add 6-inch nailing blocks to what will be the lower corners of the front panel.
- Mark the location of the vertical boards on the edges of the horizontal boards so that you can pinpoint them once they're covered.
- Next, mark where you think the vertical boards will go on either side of your horizontal ones. You can figure this out once they're covered.
2. Cut and Attach the Sheathing:
- Cut the plywood to size with a circular saw, then place it face down on one side and use your hands for stability as you work.c
- To install lauan, simply apply construction adhesive to the framing and then affix the sheet. If your pneumatic gun accepts staples, use it to fasten the sheet along the framing with ½-inch staples. If your gun doesn't accept staples, you can still use it by turning down the air pressure and using ⅝-inch nails. When nailing, be sure to tilt the gun slightly so that you don't shoot straight through the lauan.
3. Place the Corner Stiles:
- Cut the 1x4 stiles and rails to length with a miter saw.
- To install corner stiles, shift a 1x4 so that it overhangs the panel edge by ¾ inch. Mark both inside edges of these pieces on your project’s panels before setting them into place with blocks as shown. Do the same at the back edges of the side panels.
4. Miter and Insert the Molding:
- To install molding, first lay out all of your pieces inside the recessed panels created by stiles and rails. Mark their length so you can cut them at an angle when necessar.
- Using a miter saw cut these ends at 45 degrees; nail them in place with 1¼ inch nails holding off until later when you work your way around corners.
Tip: To make a tight fit, you can miter one side of panel molding and use its corner as an guide for making precise cuts on the opposite direction.
5. Attach the Stiles and Rails to the Front Panel:
- Begin by measuring the width of the recessed panels created by the stiles and rails.
- Cut pieces of molding to fit inside these panels, then miter the ends at a 45-degree angle. Nail each piece of molding in place with 1¼-inch nails, being sure to hold off on the pieces alongside the corner rail for now.
6. Attach the Shelf Cleats:
- On the interior side of each panel, mark two horizontal lines 1½ inches and 24 inches from the bottom. These marks will indicate where to install cleats that will support the side panels of your bar.
- Cut 1x1 cleats to length, leaving room for the side panels and their cleats to butt against the front panel. Once all of the cleats are in place, you can then attach the side panels to the bar.
7. Assemble the Walls:
- Mark a line along the front panel to help you center your screws into the edge of the side panel's framing.
- Mark a line along the front panel to help you center your screws into the edge of the side panel's framing.
- Drill pilot holes and drive 3-inch screws one at a time, working your way from one end to the other so that you can align the corner as you go.
8. Make the Shelves:
- To make bar shelves, start by cutting two shelves to the desired length using a circular saw.
- Cut a 1x2 to length for a toe kick and glue it underneath the front lip of the bottom shelf.
- Set the shelves in place and nail them into the cleats to keep the panels square. With bar shelves, you can easily add storage and style to your bar area.
9. Attach Corner Stiles and Clad the Sides:
- Glue the two front corner stiles and set them in place: snug against rails, overhanging edges by ⅜ inch.
- Rip ¾ inch off the width of each side corner stile. Apply glue and nail them in place for extra strength.
- Glue and nail the back of your side panels into a ¾ inch overhang.
- Place the top and bottom rails between your side stiles to scribe them. Cut, glue in place with nails for an instant appeal.
- The next step is to attach a center stile on each side and trim it as well, like we did in Step 6.
- To make the side panels, butt a 1x2 against overhanging stiles.
10. Size the Bar-Top Base:
- To determine the width of your three plywood-base, first hold a section of bar rail molding against its longest edge and snugly fit into notch on top 1x12 oak.
- Mark the plywood along the back edge of the board, as shown. Rip two lengths of plywood to this width.
11. Install the Base:
- Cut one of the plywood lengths into two pieces for the bar sides that, when flush at the back, overhang the front by 6 inches.
- Arrange them to overhang the sides by 6 inches too, then measure between them to get the length of the front piece. Cut it to length and secure the base with 1¼-inch screws.
12. Set the Oak Bar Top:
- Cut two 1x12 boards to the length of your plywood bar side pieces and measure inside edge.
- Once you have the measurement for length, set them flush with inside back corners and measure outside edge to calculate how much 1x12 needs. It will overlap seams on base layer
- Once you have cut the front piece to length, set it in place and use 1-¼ inch nails for securing.
- Finish the inside edges of the bar top with an oak 12 nailed on edge along the entire perimeter of the bar top.
13. Miter the Bar Molding:
- To pad out the saw deck with two strips of scrap plywood to fit in notch and keep it level, you'll have cut padding from one side all along its length as shown.
- Miter the end of one length of molding at a 45-degree angle.
14. Dry-Fit the Bar Molding:
- On the bar top, use a combination square to draw 45-degree lines from front corners.
- Hold up a piece of molding with one mitered end and line it up so that the joint is at 45 degrees.
- Make sure you have a tight corner by snugging up against the molding. Then, at one end carry your 45-degree line from bar top over its uncut end and miter so it will fit nicely into place once installed.
- Screwing through the plywood with 1¼-inch screws will install your cabinet.
- Miter and cut the remaining sidepieces so they overhang by ¾ inch.
- To finish the back edges of your bar top, cut a 1x2 to fit into open notches on molding with saw.
15. Attach the Brackets:
- On the front wall, mark vertical lines over nailing blocks to create an even row that is equidistant from each edge.
- Place the brackets on the marks, screw them through their respective marks on either side of an wall and into a nailing block.
16. Install the Foot Rail:
- Screw the rail into place, cap it and run a screw through both pieces of hardware.
- Fill the fastener holes on the bar with wood filler and caulk any open joints, then sand the inside of your walls before painting them.
- Sand the oak bar top with 220-grit paper, wipe it and then coats of polyurethane to protect your investment.
Cut List To Build A Bar:
- ½-inch plywood: 1 @ 60 by 42 inches
- ½-inch plywood: 2 @ 24 by 42 inches
- Lauan sheathing: 1 @ 60 by 42 inches
- Lauan sheathing: 2 @ 24 by 42 inches
- 1x2 framing: 11 @ 37 inches
- 1x2 framing: 4 @ 24 inches
- 1x2 framing: 2 @ 60 inches
- 1x4 nailing block: 2 @ 6 inches
- 1x4 stile: 5 @ 31¼ inches
- 1x4 corner stile: 4 @ 42 inches
- 1x4 corner stile: 2 @ 42 inches (Rip ¾ inch off the board’s width.)
- 1x2 stile: 2 @ 42 inches
- 1x4 rail: 1 @ 54½ inches
- 1x4 rail: Scribe 2 to size.
- 1x8 rail: 1 @ 54½ inches
- 1x8 rail: Scribe 2 to size.
- Panel molding: Miter 32 to size.
- 1x2 shelf supports: 1 @ 54 inches
- 1x2 shelf supports: 2 @ 6 inches
- ¾-inch plywood bar-top substrate: Cut 2 to size.
- ¾-inch plywood bar-top substrate: Cut 2 to size.
- 1x12 bar top: Cut 1 to size.
- 1x12 bar top: Cut 2 to size.
- Bar-rail molding: Miter 3 to size.
Shopping List:
- Paint: Valspar's Royal Garnet.
- Stain: Minwax’s Jacobean.
- Bar-rail molding: Bar-rail profile #375; Dykes Lumber.
- Foot-rail assembly: Brushed stainless-steel foot-rail tubing, brackets, and caps; KegWorks.
Tools:
- Caulking gun
- Circular saw
- Miter saw
- Power drill or impact driver
- Combination countersink drill bit
- Pneumatic nailer
- Small handsaw
- Bar clamps
- Speed square
- Framing square
- Tape measure
- Carpenter's pencil
- Hammer or pneumatic finish nailer (optional)
How to Build a DIY tiki bar?
If you're looking for a fun and unique bar to build in your home, look no further than a tiki bar. A tiki bar can create an instant party atmosphere, and with a little bit of creativity and effort, you can easily build your own.
To get started, you'll need to gather some supplies. First, you'll need bamboo or wood to create the frame of the bar. You can find this at most home improvement stores. Next, you'll need thatch roofing material to give the bar its trademark Polynesian look. This can also be found at most home improvement stores. Finally, you'll need some Tiki torches and outdoor string lights to really set the mood.
Once you have your supplies, it's time to start building. First, build the frame of the bar. If you're using bamboo, simply tie the pieces together with twine or wire. If you're using wood, you'll need to use nails or screws to assemble the frame. Next, attach the thatch roofing material to the bar frame. Start at the bottom and work your way up, overlapping each piece as you go.
Finally, it's time to add the finishing touches. Place the Tiki torches around the bar area and light them. Then, string up the outdoor lights and turn them on. And that's it! You've now got yourself a DIY tiki bar that's sure to be a hit at your next party.
22 Great Home Bar Ideas:
A home bar is a great way to add a bit of luxury to your home. Whether you want a built-in bar or simply dedicate a nook in your living room to your favorite spirits, there are options for every home. Check out our favorite ideas to help you create a cocktail bar you don't need to leave the house to enjoy.
1. Create a Wet Bar:
Creating a wet bar in your home can be a great way to entertain guests or simply enjoy a night in. If you're interested in adding a custom wet bar to your home, make sure it has all of the essentials. This includes cabinetry and shelving for your spirits, a small sink, and even additional hidden storage underneath. This project is more labor-intensive than temporary solutions, but it's a great idea for anyone who wants a permanent wet bar. By following these tips, you can create the perfect wet bar for your home.
2. Add a Standalone Bar:
If you want something that feels intentional without undergoing a whole renovation, this idea from 126 Interiors is a great choice. Look for a standalone shelf that pairs well with your existing wet bar or cabinetry (a perfect match isn't essential). This will provide a dedicated space for spirts that still feels in sync with your other decor. Plus, it's an easy way to add storage and style to your home bar.
For a truly unique bar, consider using an antique piece of furniture. An old dresser or sideboard can be repurposed into a one-of-a-kind bar cart. Just make sure to add some shelving or cabinet doors to keep everything tidy. You can also use vintage suitcases to create a bar cart with a bit of whimsy. Or, for a more modern look, try using a metal or glass shelving unit.
No matter what style you choose, be sure to stock your bar with all the essentials: glassware, bar tools, and of course, your favorite spirits.
3. Paint it Dark and Moody:
If you're looking to add a touch of luxury to your home bar, painting it a dark color is an easy and affordable way to do so. A dark bar will create a moody, sophisticated atmosphere similar to that of a real cocktail bar. Kelly Stone Interiors' sleek black bar is a great example of this look. To get the same effect, try using a dark paint color and adding mirrored tiles to the backsplash.
4. Add a Mirror:
One great home bar idea is to add a mirrored backsplash. This will give your bar a commercial feel and make the space appear larger. Mirrored siding is also a great way to create the illusion of more space. This is a great idea if you want to create a cozier look in a dining room corner or a butler's pantry. Adding bar glass shelving is also a great way to give your bar that professional look.
5. Think Vertically:
If you're looking for a sleek and modern way to store your bar supplies, take a cue from this lovely home bar from Studio Thomas. Featuring a glass wall shelving unit, it's perfect for small spaces but still has plenty of room to store glasses and bottles. Plus, the clean lines and minimalist design will complement any contemporary décor. Cheers to this great home bar idea.
6. Repurpose a Dresser:
If you're looking for a great home bar idea, look no further than this stunning bar from Emily Harris. Not only is it beautifully stocked, but we love the idea of repurposing a vintage dresser or desk to create a classic home bar. Just add a few floating shelves for wine glasses and bar tools and you have a space that's perfect for any cocktail party.
7. Add in Metallic Elements:
A bar cart is a great way to add some extra storage and style to your home. If you're looking for a unique bar cart idea, try incorporating some metallics into your design. This lovely home bar from Paper Moon Painting features silver and gold accents to help create a fancier touch. Metallics are great accent colors for a home bar (ever wonder why so many bar carts are gold?) and a great way to experiment with them if you have an otherwise minimalist home.
8. Add a Wine Fridge:
If you're looking for ways to upgrade your home bar, one of the best things you can do is add a small beer or wine fridge. This will give you more storage space for your drinks and make your bar feel more luxurious. Even if you don't have room for a built-in option like this one from Joy Street Design, adding a mini-fridge next to your bar cart or table is a great way to make your space even more functional.
9. Go Bold With Blue:
Jennifer Backstein Interiors has a great home bar idea that is sleek, classic, and perfect for a nook in a kitchen or even standalone in a den or living space. Navy is a great color for a home bar because it is a hue that elevates any space and helps it feel a little fancier. This bar would be perfect for entertaining guests or enjoying a night in with family and friends.
10. Add Wine Storage:
Whether you're a wine connoisseur or just enjoy the occasional glass, having a bar in your home can be a great addition. Michael Robert Construction has come up with a stunning home bar idea that would be perfect for any wine lover.
Even if you can't recreate such an elaborate wine vault in your own home, hanging a wine rack against a wall or adding a few stackable wine boxes can provide easy storage. So if you're looking for a great way to add a bar to your home, consider this idea from Michael Robert Construction.
11. Take Over a Butler's Pantry:
If you're looking for a great way to add a home bar to your space, consider repurposing a butler's pantry. This beautiful bar from House Lift Design shows how a small space can be transformed into a chic and functional bar area. By tucking the bar away in a butler's pantry, you can keep it out of the way when entertaining guests. This is a great way to create a wonderful space for mixing cocktails and storing drinks.
12. Create a Real In-Home Bar:
If you're looking for a great home bar idea, you'll love this amazing setup from Sally Does Sassy.
https://flightwinebar.com/blog/how-to-build-a-bar/
Comments
Post a Comment